Jack’s Walk

We had a good rain last night and when it was over the humidity and high temps were gone. We slept with the windows open and this morning greeted us with a cloudless blue sky and a lovely breeze. It’s definitely an outside kind of day. I hope it is for you too.

Pittock Lake, ©voyager, all rights reserved

Anatomy Atlas Part 16 – Feet Muscles

Feet. Some may find them pretty, or even alluring. Not me. Whilst hands are true marvels of what evolution can achieve, our feet are very far removed from being such. Their ad-hoc nature is all too apparent.

©Charly, all rights reserved. Click for full size.

Humans are plantigrade, as are many tree-dwelling creatures and only a few land-dwellers (like bears). That means our heels  touch the ground and not only the tips of the fingers. Most land dwellers are digitigrade, that is they walk on their fingers or their tips. That has the advantage of allowing for greater speed – and indeed even humans resort to moving on their toes when speed is the priority.

Professor Kos emphasised that although “plantigrade” means “touching the ground with the whole sole” this is not in fact true. Our feet do not touch the ground with the whole sole , not as such. There are only three points that bear weight – the heel, the big joint at the base of the big toe and the joint at the base of the fourth toe. That is why we are able to stand on one foot – it still provides three points of contact for stability.

And just as it is with the hand, most of the muscles that actually move the feet are not in the feet, but on the calf.

Tree Tuesday

This week we have a trio of beautiful trees from Lofty who says: They are all much the same species of Eucalypt in a nearby region of dairy farms. The big solitary trees can’t reproduce easily as they are surrounded by large munchie beasts.

I think they’re each lovely all by themselves, but together Lofty’s clever titling makes them a humorous and thoughtful grouping.

Thanks, Lofty. Click for full size.

cemetree, ©Lofty, all rights reserved

magestree, ©, Lofty all rights reserved

senilitree, ©Lofty, all rights reserved

 

Going Missing (Admin Stuff).

© C. Ford.

I’m so sorry, but I have been eaten alive by pain all day, and nothing has gotten it under control so far. Tuesday is the all day appointment day: labs/research/oncologist/Y program application/radiation/oncologist/caregiver group/possibly swimming if I stop wanting to scream, and probably more stuff I forgot. So I’m going to flake off entirely on Tuesday (17th).

If I somehow magically get the pain under control, I’ll show up.  Right now, I can’t cope with sitting at all, so the thought of sitting down to do blogging is not a welcome one. My apologies, I hope this will be under control quickly, so I can get back to doing the things I love to do.

Jack’s Walk

It’s a 32° day here with rain expected this evening and boy do we need it. It was supposed to rain all weekend, but we only had a bit of drizzle on Saturday so all the growing things are still thirsty. The heat today will only make that worse so I hope the weatherman has it right this time.

Note: Thanks to kestrel for correctly identifying this plant as False Solomon’s Seal.

 False Solomon’s Seal, ©voyager, all rights reserved

 

Good Trolling.

After the ever idiotic Tiny Tyrant declared the EU to be the greatest foe of Amerikka, Merriam Webster jumped in with an excellent troll:

Let’s have a look at that full definition, shall we:

Definition of foe

1: one who has personal enmity for another

<Embrace, embrace, my Sons! be foes no more! —Alexander Pope>

2 a: an enemy in war b: adversary, opponent: a political foe

3: one who opposes on principle: a foe of needless expenditures, a foe of censorship

4: something prejudicial or injurious

Examples of foe in a Sentence:

Many considered him a foe of democracy.

♥

Good one, Merriam & Webster! The tweet is here, the full definition here.

Making a Rondel Dagger – Part 13 – Assembly

Let me tel you one thing upfront – this was the most nerve-wracking part of the whole job. For a moment there I thought that I have destroyed the whole thing and I will have to start all over again, which I am not completely sure I would be able to.

First setback was the guard – look on the picture, do you see it? I did not notice it when I have made it, and it escaped my notice for quite a few days, but when trying the assembly I noticed a sizable gap between the guard and the tang. It is only about 0,3 mm, but the mirroring of the blade and the guard make it visually double that size. I thought that I will use it anyway, but it pissed me off and in the end I reckoned that having a botched project on which I have already spent probably about 50 or more working hours due to a part that takes about 3 hours to make is not worth it, so on Friday I have made a new guard. The fit was still not perfect, but this time it was good enough for me to live with it.

As I said, the wooden handle was a bit shorter than intended. Original intent was to have the bowl-shaped rondel fit snugly onto the end of the handle. But since I had to make the end of the handle flat, I had to do something to prevent the rondel from collapsing. So I needed not only the knob/nut into which the tang will be peened, but also a washer between the handle and the rondel. Both of these I have made from an old window hinge. which I first have polished with angle grinder and soft abrasive pads and then cut off a piece with hack saw. I drilled a 5 mm hole in the middle (badly) and cut the piece into two parts – the washer flat on both sides, and the nut flat on one side, and rounded on the other. I have also chamfered the outer edges on the hole in the nut, for the peening to hold on to.

Then came the fitting of all the parts together. You might think that since I have burned the hole with the tang, there would be a perfect fit, but you would be wrong. It had quite a lot of radial wobble and charcoal dust kept falling out of it. So I have taken a rat-tail rasp and filed the burned wood away, which of course made the wobble even worse.

But I had a solution to that in mind. I remember that in Ivanhoe it is mentioned that tangs were fitted into handles by a mixture of glue (resin) and crushed brick. That makes sense – crushed brick is chemically stable, compression-strong material that is nevertheless porous enough to be effectively glued. Crushing brick was no brainer, just wrap it in a rag and let a 2 kg hammer fall on it a few times, letting the gravity do the job, and then sieve it to get fine dust. However since I run out of resin and have not yet managed to get to the forest to get some new, I have decided to use hide glue instead.¹ It did not work out as intended.

To be fair, I think the idea was sound, it is my execution of it that was wrong. I have used paper masking tape to protect the blade against scratches during this work, but the guard and the bolster were completely unprotected. Further I knew that this paper tape does not protect against moisture and rust, so I had to do the whole assembly in a few hours so I can remove the tape afterwards and oil everything. Had I used molten resin, that would be possible (probably – we will see next time), but hide glue needs of course time to dry, and I did not dare to let it wait for fear of rust getting on the polished surfaces.

Here you can see that I had a lot of tang before my first attempt. Until this point everything went smoothly and I did not expect any trouble. Oh was I wrong, yes I was. In addition to the glue not being hardened I have made a few bloopers.

First was that I have not secured the rondel with tape – it fits properly only one way around and could not be rotated willy-nilly without unseemly gaps appearing. The side that is supposed to point towards the cutting edge of the blade was marked, but only on the inside, not on the outside.

Second was that I have not hammered the nut sufficiently on the whole thing and it remained hanging on the tang a few tenth of a mm above the rondel without me noticing it.

Third was to not shorten the tang sufficiently.As a result the tang was too long and its end has bent during peening.

The result was a handle that wobbled and was out of center and a rondel that did not fit and was askew like drunkard’s hat. I did not take a picture of that shameful display. Nor did I make pictures of following works, because I was too stressed out to think about that.

Because his was the point where I thought that I have botched the job and that I will have to at the very least try to weld on a tang extension. I ground off most of the badly peened end and after a few minutes of work with a vice I managed to rip the nut off. Luckily it seemed there is enough tang left when I make the nut a bit thinner. So I have filed the nut about 1 mm down and tried again. The trouble was the centering of the grip. The mixture of glue and brick was just not strong enough in such a short time to get the grip center and hold it there. In the end I had to hammer and file three small (circa 0,5 mm thick) steel wedges that I have positioned around the tang before hammering the handle onto it until the bolster met the guard. I had to pull it of and monkey around with the wedges three times, filing them and hammering them thin, before I was satisfied.

For second attempt at peening I have not only made a mark on the outside of the rondel with a sharpie, I have also fixed it with tape before peening. And before peening I have put aluminium tube on the nut and hammered it down so it lies tightly on the rondel. This time peening the end of the tang with ball peen hammer went smoothly and without problems. There was a teensy bit too little tang for  the peen to completely hide during polishing, but I can live with that. Here you can see the peen before polishing.

The dagger is now nearly complete. Now I have to re-polish and re-buff the rondel, because I have scratched it, and to soak the handle with linseed oil. That will take a few days to polymerize properly, and in the meantime I will continue work on the scabbard.

1 – I could of course use epoxy and save myself a lot of trouble, but from the start I wanted to do this project using only materials and methods that are appropriate for medieval-ish dagger. I have only used modern things where that saves time, but does not have an effect on the composition and aesthetics of the result.

Luna Day Mood.

Nergal two ways, three videos! Behemoth, of course, and Nergal’s recent side project, a Western fusion kind of thing, Me And That Man. CW: there’s brief full frontal nudity in the Behemoth video. It’s good to see Nergal continues to do well after the fight with leukemia. A lot of people are being asses about Me And That Man, but I say give it a chance. There’s the new Behemoth album you can run back to, but it’s normal for artists to stretch themselves now and again.

Behemoth – O Father O Satan O Sun!

Me And That Man – Ain’t Much Loving.

Me And That Man – Cross My Heart And Hope To Die.

Black Baccara & Black Dragon.

Stunning Roses from Nightjar: As promised, I’m sending photos of my “black” roses. The dark red one I bought this year as a Black Baccara, the striped one was planted by my grandmother many years ago and it still blossoms abundantly every year. I don’t know exactly what variety it is, but after a quick google search I came up with three different names that could describe it: “Black Dragon”, “Abracadabra” and “Simsalabim”. I don’t know which one is more appropriate, I just know it’s a beautiful rose!  I just want to bury my nose in that first rose. Click for full size!

© Nightjar, all rights reserved.