Marcus Gave Me Wood, Here Is What I Did With It

Marcus sent me a piece of stabilized maple burl last year. It wasn’t very big, not enough for my usual chunky knife handles, but it was big enough for two badger knives, so I used it for the last two blades in the current batch.

I did not do the brass bolsters and pommels very well, I am afraid. The pins refused to blend in – they do so so seamlessly in aluminum and stainless steel, but so far I did not have any luck with brass. And since this blade is stainless steel, some artificial extreme patina would not look proper. I tried to make the heads rounded this time, but I did not like the look of it at all, especially because I did not position them correctly for that kind of look. Nevertheless, the extremely beautiful wood from Marcus, when polished with beeswax, does redeem the knives a little. And when I saw how pretty the wood is, I have decided to make better and nicer sheaths for these knives too.

© Charly, all rights reserved. Click for full size.

© Charly, all rights reserved. Click for full size.

This is the better of the pair. Making the silver maple leaves was real fun, and I have managed to get the colors very close to what I have originaly designed in Photoshop.

It looks pretty, but silver maple is not native here so for the second one I have used a different design and color palette – yellow small-leaved linden leafs.

© Charly, all rights reserved. Click for full size.

© Charly, all rights reserved. Click for full size.

The small-leaved linden tree is pretty common here and it is also Czech national tree, so I have been intentionally a bit patriotic with this one. Unfortunately, I run out of the medium thickness leather so I had to use the thicker one and it was just a tad too thick for this small knife design. It is not a functional problem, only the leather could not be formed so snugly around the knife, because the knife would not get out.

I think my leatherwork is improving and I like these leafs-designs. I shall definitively use them more, even though they are a bit labor-intensive, especially since I do not intend to use the same design twice. I might use the outline, but I will always at least mix up the colors differently.

Jack’s Walk

I call her Cocoa © Voyager, all rights reserved

Jack has been having problems with swelling and pain in his left shoulder. It’s likely arthritic, and it would be good for him to start taking an anti-inflammatory drug called Meloxin. Our first lab Lucy had a lot of joint problems and she took Meloxin for years with good effect and I want Jack to have equal comfort in his senior years. Trouble is, that Jack takes a steroidal allergy tablet every day because he’s allergic to grass, and the two drugs are incompatible so he can’t start it until the grass is dead and he stops the steroids. We see the Vet on Monday to discuss other options, but for now, Jack is limited to one short walk a day. He isn’t very happy about this state of affairs, especially since getting in and out of the car is difficult, and we’ve been sticking close to home. I can’t believe I’m actually saying this out loud, but I hope it snows soon. Sorry folks, but it’s going to come eventually, and the sooner all this lush green October grass goes to bed for the winter, the sooner my Bubba can have some fun again.

The photos are from last week.

Isn’t she beautiful? © Voyager, all rights reserved

This is Cocoa’s best friend, Nugget © Voyager, all rights reserved

Upcycling Old Jeans

During my first experiments with resin stabilized wood, I had a lot of dark brown leftover resin at the end of it. So I have decided to do a little experiment.

I took some old black jeans, cut them into squares of approximately the sizee of a hand palm, soaked the pieces in the resin, stacked them in a receptacle and I poured all the remaining resin all over them. I have tried my best to chase and push manually all the bubles out and let it harden.

The resulting material has an official name – micarta – and the results look quite well, I think.

© Charly, all rights reserved. Click for full size.

© Charly, all rights reserved. Click for full size.

The pieces were not too big, but big enough for four small scales for two of the badger knives that I had in production, so I have used them straightaway. The material works well, it is sufficiently hard to take decent polish, but not so hard as to be difficult to work with. It does heat up a bit and clogs up sanding belts, but reducing the belt speed and using only fresh belts did away with that problem.

© Charly, all rights reserved. Click for full size.

© Charly, all rights reserved. Click for full size.

That the layers are not perfectly perpendicular and flat adds a bit more character to the material, which I like. I think it is a good way to use excess resin and these knives should now be extremely resistant to elements – the blades and fittings are all stainless steel, the handle scales are micarta and the sheaths are leather infused with beeswax. They would probably survive for a non-trivial duration in fog and rain outdoors. Not that I would do that to them.

I am also pleased that now that these knives are significantly less work than the bowie-type small hunting knivest that I was presenting previously. The goal is to have a mix of cheap(ish) and expensive items on offer in the future, I do not wish to only make luxury items that take weeks to months finish each, neither do I wish to destroy my enjoyment of the craft by bogging myself down in repetitive tasks o making the same thing over and over again.

Jack’s Walk

© Voyager, all rights reserved

Jack and I see lots of chipmunks on our walks, and I often try to take a photo, but they dart away too quickly and in unpredictable directions. Today, though, this little guy literally darted into the spot where I was aiming my camera, and then he stopped for a moment. It was just long enough for me to grab a few shots before he darted off again.  Although this looks like a planned sort of chipmunk picture, I was actually trying to photograph the saddle of the log behind the chippie. In retrospect, that would have been boring, so thanks, little guy for the photobomb.

© Voyager, all rights reserved