A friend tasked me with making a knife for their spouse. The spouse does not cook, so a kitchen knife was not an option. But they do occasionally go on a camping trip or a forest walk with the kids, so we eventually established that some sort of camping/bushcraft knife would be best.
The ideal material for a knife of this kind would be spring steel, but since it is unlikely that their life will depend on it, N690 should suffice and rust won’t be a problem. So I set to work and I have made this.
The blade is 160 mm long and 5 mm thick at the handle and tapers toward the tip. N690 steel, sand tumbled satin finish. The handle is made from rotten willow wood stabilized with green-dyed resin. It is a big boi – it weighs 300 g (and that is with the fullered blade and handle is lightened too by holes in the tang). A sharpening angle of 25° should guarantee that with occasional use, the blade will not need sharpening any time soon. Despite being thick, it is reasonably sharp and cuts well, because it has a flat grind all the way to the spine. It is balanced at the bolster, and it packs quite a punch, as a knife of this type should. And because the spine is so thick, it should withstand even some serious abuse should the owner decide to inflict it on the blade. Which I suspect they won’t.
The accessories are a ferrocerium rod and carbon steel striker as a fire starter (more for fun than real purpose, matches are better) and a sheath with a pouch for these. Theoretically the carbon steel striker is not necessary, but when testing it out, I got the subjective impression that carbon steel strikes better sparks from the ferrocerium rod. I might be wrong, I could not think up an objective test for that.
Making fullers by hand is very difficult, it will probably take several more blades before I get it right. I am currently wracking my head about how to make an accessory for my grinder that would make this difficult task just a tad easier. So far no success, just a few semi-functional, semi-failed attempts.